#SYNOLOGY WINS SERVER SETUP MANUAL#

Well now the VPN Server is up and running and you can setup your connections on the different devices. If you also activated OpenVPN вЂ“ you might also want to open port 1194 (UDP). To enable the VPN traffic through the router for PPTP you need to open the ports 1723 and 47 (GRE). Next step is to make sure, that the correct ports are open in your router. Since my NAS server is Danish, the field names in the screen shot is unfortunately in Danish.

Now push Apply and the VPN Server is active for PPTP on the Synology NAS Server.

#SYNOLOGY WINS SERVER SETUP MANUAL#

In the case we will not be using a manual DNS. If you do not want to use the same DNS as the NAS вЂ“ then you can mark use manual DNS and afterwards specify a new DNS.MTU (Maximum Transmission Unit) will typically be 1400, just leave this field unchanged unless you want to limit the data package size or youВ receiveВ a lot of time outs вЂ“ in this case you might want to lower the MTU number.If MS-CHAPs is used you can setup the Encryption method (None, Require MPPE or Max MPPE).Chose Authentification вЂ“ PAP (No encryption of password) or MS-CHAP (Microsoft CHAP encryption of passwords).

Set up the number of concurrent VPN connections.Assign a Dynamic IP Address, the Dynamic IP Address will be used when assigning the Virtual IP-addresses to VPN clients.Is an open source application which implements virtual private network techniques for creating secure point-to-point connections. вЂ“ Point-to-Point Tunneling Protocol is a common used protocol, which is supported by most clients вЂ“ such as Windows, Apple, Linux.

Synology wins server setup